Logistics & conveyor technology

Reliable lighting for automated material handling

In intralogistics and conveyor systems, automated conveyor lines, sorting systems, and transfer points ensure smooth material flow. For safe operations, error-free identification, and efficient maintenance, uniform, glare-free lighting is essential—for both personnel and camera-based systems.

Typical requirements:
24/7 operation with high cycle rates, long system lengths, vibration from conveyor equipment, dust exposure, safe illumination of transfer points, glare-free lighting for personnel and vision systems, flicker-free light quality, low-maintenance solutions.

LED2WORK solution:
High-output machine lights for long conveyor runs, homogeneous illumination of transfer and inspection areas, installation-friendly options for mounting and integration, rugged construction for 24/7 operation, long-life LED technology to minimize downtime.

Recommended luminaires:

TUBELED_25 RGB-W & IO-Link (smart status signaling directly on conveyor and sorting systems)
SIGNALED II RGB/W (clear, highly visible machine and process status at a glance)
DOMELED 50 / 90 Analog (clear visual status indication for machine and process states)
DOMELED 50 / 90 IO-Link (intelligent status feedback with direct PLC connection)
TUBELED_70 EVO (high-output for large conveyor systems and transfer points)

Plastic injection molding machines

Clear visibility in heat, oil mist, and fume environments

Injection molding machines often run 24/7, with frequent mold changes, sampling, and visual inspections performed directly at the machine and take-off area. To maintain stable quality, reliable visibility, rugged components, and minimal maintenance are essential despite thermal loads, hydraulic fluids, and process chemicals.

Typical requirements:
Heat/temperature zones (mold/hot runner), oil mist & hydraulic oil environments, fumes/emissions from plastics & additives, release agents/cleaners/degreasers (chemical exposure), low-shadow lighting for visual inspection (part surface/gate/flash), compact installation space, low maintenance, fast washdown; safety-relevant machine environment per DIN EN 201 (injection molding machines).

LED2WORK solution:
Homogeneous, low-shadow lighting for part and tool inspection (sampling/setup), rugged industrial construction for continuous operation, options/interfaces for fast integration; chemical- and washdown-resistant designs depending on the application.

Recommended luminaires:

TUBELED_40 II (rugged, machine interior/oil environment)
TUBELED_25 Standard or RGB-W (lighting + status/signaling in one fixture)
CENALED Spot recessed (reliable, compact, high-output)

Woodworking machines

Safe visibility despite dust and chips

Woodworking machines range from cutting and edge processing to CNC nesting and sanding. To maintain consistent quality, clear visibility, rugged components, and minimal maintenance are essential in dusty environments. 

Typical requirements: 
Dust/chips, vibration, low-shadow illumination, compact installation space, low maintenance, fast cleaning. “D marking,” especially in fire-prone facilities. 

LED2WORK solution:
Homogeneous lighting for inspection and setup, rugged machine lights for continuous operation, easy integration. 

Recommended luminaires:

TUBELED_40 II (rugged, machine interior)
LEANLED II (rugged for the application, strong price-performance ratio)
TUBELED_25 Standard or RGB-W (simultaneous lighting & signaling)

Metalworking machines (general)

Reliable visibility in oil, coolant, and chip environments

Metalworking machines include turning, milling, drilling, sawing, and grinding across a wide range of configurations. To ensure consistent quality and process reliability, clear visibility, rugged components, and low-maintenance lighting are essential—even in the presence of coolant, chips, and mechanical stress.

Typical requirements:
Exposure to oil and coolant, metallic chips/particles, vibration and shock, low-shadow and glare-free illumination for setup and inspection, compact installation space inside the machine, high ingress protection ratings, low maintenance, fast washdown, and easy retrofitting.

LED2WORK solution:
Homogeneous, low-shadow lighting for safe workpiece and tool inspection; extremely rugged machine lights for continuous industrial operation; a wide range of options for different machine concepts and quick integration into existing equipment.

Recommended luminaires:

TUBELED_40 II, Integrated (highly rugged for oil/coolant and chips inside the machine)
TUBELED_70 EVO (rugged, high-output, also ideal for retrofits)
FIELDLED EVO for recessed or surface mounting
VARILED II (compact, simple, high-performance)

CNC / machine tools / machining centers

Precise control in coolant, high-pressure, and chip-impact environments

Machining centers and machine tools (3-/5-axis, turn-mill, automated cells) operate at high productivity with intensive coolant delivery and chip flow. For consistent quality, low-shadow visibility of the tool and workpiece, along with rugged, low-maintenance lighting in tight workspaces, is essential.

Typical requirements:
Coolant/oil mist and regular washdown, chip impact, vibration and shock, extremely compact installation space in the work area, low-shadow and glare-free illumination for setup, inspection, and maintenance, constant flicker-free light quality, high ingress protection, and long-term continuous operation.

LED2WORK solution:
Homogeneous, low-shadow lighting for precise setup and reliable process monitoring; rugged machine lights for coolant/oil environments and chips; easy-to-install options for the work area, enclosure, and operator zone.

Recommended luminaires:

TUBELED_40 II, Integrated (highly rugged for oil/coolant and chips inside the machine)
TUBELED_70 EVO (rugged, high-output, also ideal for retrofits)
FIELDLED EVO for recessed or surface mounting
VARILED II (compact, simple, high-performance)